首页 | 本学科首页   官方微博 | 高级检索  
     

上浮速度对钢渣界面夹杂物去除的影响
引用本文:刘 超,李京社,孙丽媛,杨树峰,唐海燕.上浮速度对钢渣界面夹杂物去除的影响[J].特殊钢,2014,35(5):5-7.
作者姓名:刘 超  李京社  孙丽媛  杨树峰  唐海燕
作者单位:北京科技大学冶金与生态工程学院,北京 100083
基金项目:国家自然科学基金资助(No. 51304016)
摘    要:通过建立夹杂物在钢渣界面及其附近钢液和渣层连续区域的运动模型,研究了上浮速度(Stokes速度,0.1~0.5m/s)对50~200μm夹杂物分离去除的影响。研究结果表明,上浮速度的提高对50μm以下夹杂物在钢渣界面的分离时间影响不大,而会使50μm至150μm的夹杂物分离时间变长,使≥150μm的夹杂物分离时间缩短,对于150μm的夹杂物上浮速度由Stokes速度提高到0.5m/s时,夹杂物分离时间由260×10-5s缩短到6×10-5s。

关 键 词:上浮速度  钢渣界面  夹杂物尺寸  去除  
收稿时间:2014-04-23

Influence of Floatation Velocity on Removal of Inclusions at Steel-Slag Interface
Liu Chao,Li Jingshe,Sun Liyuan,Yang Shufeng,Tang Haiyan.Influence of Floatation Velocity on Removal of Inclusions at Steel-Slag Interface[J].Special Steel,2014,35(5):5-7.
Authors:Liu Chao  Li Jingshe  Sun Liyuan  Yang Shufeng  Tang Haiyan
Affiliation:School of Metallurgical and Ecological Engineering, University of Science and Technology, Beijing 100083
Abstract:The influence of floatation velocity ( Stokes velocity, 0.1-0.5 m/s) on separation and removal of 50-200 μm inclusions is studied by established, a moving model of inclusions at steel-slag interface and in liquid metal and slag layer continuous zone near the interface. Study results show that with increasing floatation velocity, there is no obvious influence on removal time of less than 50 μm inclusions at steel-slag interface, but the separation and removal time of 50 μm to 150 μm inclusions increases while the separation time of ≥150 μm inclusions reduces, as for instance, for 150 μm inclusions ,with the floatation velocity increasing from Stokes velocity to 0.5 m/s, the inclusions separation time reduces from 260 x 10-5 s to 6 x 10-5 s.
Keywords:Floatation Velocity  Steel-Slag Interface  Size of Inclusions  Removal  
本文献已被 CNKI 等数据库收录!
点击此处可从《特殊钢》浏览原始摘要信息
点击此处可从《特殊钢》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号