首页 | 本学科首页   官方微博 | 高级检索  
     

摩擦-动力应力模型研究喷动床内气固两相流动过程
引用本文:郝振华,王淑彦,白颖华,陈巨辉,陆慧林.摩擦-动力应力模型研究喷动床内气固两相流动过程[J].化工学报,2009,60(6):1414-1420.
作者姓名:郝振华  王淑彦  白颖华  陈巨辉  陆慧林
作者单位:哈尔滨工业大学能源科学与工程学院
基金项目:国家自然科学基金项目(50776023,20606006)~~
摘    要:考虑颗粒滑动的半持续性接触应力和颗粒碰撞瞬时接触应力对颗粒相应力的贡献,建立了喷动床内气体颗粒两相流动计算模型。采用颗粒动理学和Johnson 等的摩擦应力模型,数值模拟喷动床颗粒流动过程,获得了喷动床喷射区、环隙区和喷泉区内颗粒流动特性。模拟计算与He等的实验结果进行了对比。同时分析了摩擦应力模型对颗粒相黏度变化的影响,表明中速颗粒流的颗粒相摩擦应力模型将直接影响喷动床气体颗粒两相流动的预测。

关 键 词:喷动床  颗粒动理学  摩擦-动力应力模型  数值模拟  
收稿时间:2008-11-30
修稿时间:2009-2-25  

Simulation of gas-solids flow in spouted beds from frictional-kinetic stresses model
HAO Zhenhua,WANG Shuyan,BAI Yinghua,CHEN Juhui,LU Huilin.Simulation of gas-solids flow in spouted beds from frictional-kinetic stresses model[J].Journal of Chemical Industry and Engineering(China),2009,60(6):1414-1420.
Authors:HAO Zhenhua  WANG Shuyan  BAI Yinghua  CHEN Juhui  LU Huilin
Affiliation:School of Energy Science and Engineering;Harbin Institute of Technology;Harbin 150001;Heilongjiang;China
Abstract:Flow behavior of gas and particles was simulated in the spouted beds by using an Eulerian-Eulerian two-fluid model on the basis of kinetic theory of granular flow.The frictional-kinetic constitutive model for dense assemblies of solids was incorporated.The kinetic stress was modeled by using the kinetic theory of granular flow,while the friction stress was from the combination of the normal frictional stress model proposed by Johnson et al to account for strain rate fluctuations and slow relaxation of the a...
Keywords:spouted bed  kinetic theory of granular flow  frictional-kinetic stresses model  numerical simulation
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《化工学报》浏览原始摘要信息
点击此处可从《化工学报》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号