首页 | 本学科首页   官方微博 | 高级检索  
     

分光光度法测定铜合金中微量钼
引用本文:钟国秀,黄清华. 分光光度法测定铜合金中微量钼[J]. 中国材料科技与设备, 2011, 0(5): 46-47
作者姓名:钟国秀  黄清华
作者单位:[1]湖北省机电研究设计院,湖北武汉430070 [2]湖北省建材研究设计院,湖北武汉430071
摘    要:抗坏血酸—硫氰酸盐分光光度法较为广泛的应用于钼的测定,是灵敏度和相对稳定性较好的测定钼的一种方法。本文以铜盐作催化剂,用硫脲消除基体铜的干扰,用抗坏血酸作还原剂,使5价钼与硫氰酸盐形成橙色络合物,借此作为钼的光度法测定。此络合物的最大吸收波长为460 nm,钼的浓度0~4.0 mg/L 范围内有良好的线性关系。方法用于铜合金中钼的测定,相对标准偏差小于2%

关 键 词:  抗坏血酸-硫氰酸盐  铜合金  分光光度法

Spectrophotometric Determination of Molybdenum in Copper Alloy
Affiliation:ZHONG Guo -- xiu , HUANG Qing --hua (1. Hubei Reserch& Designing Institute of Mechanical Electronic Engineering, Hubei, Wuhan, 430070, China; 2. Hubei Reserch & Designing Institute of Building Material, Hubei, Wuhan, 430071, China)
Abstract:Ascorbic acid -- potassium salt is more widely used in spectrophotometric determination of molybdenum, is the relative stability of better sensitivity and a method of determination of molybdenum. Taking copper as a catalyst, copper thiourea to eliminate the interference of the matrix, with ascorbic acid as reducing agent, the molybdenum ( V ) orange complex formation with thioeyanate, to a determination of molybdenum. The maximum absorption wavelength of 460 nm, the concentration of molybdenum 0-4. 0 mg / L in the range a good linear relationship. Methods for the determination of molybdenum in copper alloy, the relative standard deviation less than 2%.
Keywords:Molybdenum  Ascorbic acid- potassium salt  Copper alloy  Spectrophotometry
本文献已被 维普 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号