The effect of rice variety and starch isolation method on the pasting and rheological properties of rice starch pastes

The effect of rice variety and starch isolation method on the pasting and rheological properties of rice starches was evaluated. One waxy and three non-waxy rice varieties from California with a range of amylose contents of 1.6–26.5% and four methods of isolation were evaluated. A rotational rheometer (RR) was used to measure the pasting and rheological properties of starch dispersions (8% w/w). The RR pasting curves had similar shapes to those from a rapid visco-analyzer (RVA). The four treatments used for isolating starch were a protease, NaOH (0.1% and 0.4%), or sodium dodecyl sulfate (SDS) (1.0%). The NaOH (0.4%) and SDS treatments were found to reduce the peak pasting temperatures of the non-waxy starches as compared with the protease and NaOH (0.1%) treatments. The same trend of the treatments was found with the elastic moduli, low shear viscosities, and yield stresses of the non-waxy starch pastes measured at 65 °C, immediately after pasting. The elastic moduli of the waxy starch pastes appeared to be least affected by method of starch isolation, but the low shear viscosity and yield stress of the protease starch paste was significantly higher than the paste from the other three treatments. Overall, the method of rice starch isolation was found to affect the gelatinization and rheological characteristics of hot rice starch paste.