| 2800 mm中厚板精轧机辊型开发与应用 |
| |
| 引用本文： | 宋耀华,吴炳火,张光新,周佩,段东明,孙林,张清东.2800 mm中厚板精轧机辊型开发与应用[J].武钢技术,2002,40(5):1-5. |
| |
| 作者姓名： | 宋耀华 吴炳火 张光新 周佩 段东明 孙林 张清东 |
| |
| 作者单位： | 1. 武汉钢铁（集团）,湖北武汉,430083
2. 北京科技大学,北京,100083 |
| |
| 摘 要： | 用平面变厚度有限元方法对中厚板精轧机辊变形分析的基础上，应用模拟退火算法，建立轧辊磨损、热凸度预报模型及工作辊与支持辊辊形同步解耦设计的理论和方法，开发出PMR和PWR辊形，成功在2800mm轧机上长期稳定地使用，取得显著效果。
|
| 关 键 词： | 中厚板精轧机 辊型 轧辊磨损 |
| 修稿时间： | 2002年5月7日 |
Development & Application of Roll Contour in the 2800 mm Plate Mill |
| |
| Song Yaohua,Wu Binghuo,Zhang Guangxin,Zhou Pei,Duan Dongming.Development & Application of Roll Contour in the 2800 mm Plate Mill[J].Wisco Technology,2002,40(5):1-5. |
| |
| Authors: | Song Yaohua Wu Binghuo Zhang Guangxin Zhou Pei Duan Dongming |
| |
| Affiliation: | Song Yaohua Wu Binghuo Zhang Guangxin Zhou Pei Duan Dongming (Wuhan Iron & Steel Corp. Wuhan Hubei 430083) Sun Lin Zhang Qingdong (Beijing University of Science and Technology Beijing 100083) |
| |
| Abstract: | On the basis of analysis of deformation on the rolls of the plate mill using the two-dimensional variable thickness finite element method the PMR and PWR roll contours have been developed. By applying the simulated annealing algorithm a roll wear and thermal convexity prediction model is set up and the designing theory and method of synchronous decoupling of the work roll and backup roll contour developed. Since the successful application of the roll contour to the 2800?mm plate mill very favorable results have already been achieved. |
| |
| Keywords: | plate mill roll contour roll wear |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
