首页 | 本学科首页   官方微博 | 高级检索  
     

基于刚柔耦合模型的变速器敲击特性
引用本文:丁康,陈志强,杨志坚.基于刚柔耦合模型的变速器敲击特性[J].振动.测试与诊断,2016,36(6):1129-1135.
作者姓名:丁康  陈志强  杨志坚
作者单位:(1.华南理工大学机械与汽车工程学院,广州510641)(2.重庆理工大学汽车零部件先进制造技术教育部重点实验室,重庆400054)
基金项目:汽车零部件先进制造技术教育部重点实验室2010年度开放基金资助项目(2010KLMT04)
摘    要:为研究变速器齿轮传动系统的敲击振动特性,专门设计了一台只包含两个档位的试验变速器。以该试验变速器为研究对象,综合考虑各零部件连接关系、齿轮内部动态激励、发动机转速波动和负载激励、轴承刚度阻尼特性以及箱体的柔性化特性,运用LMS virtual lab软件建立变速器的刚柔耦合多体动力学模型,分析了变速器齿轮系统敲击的产生条件并给出敲击时间历程与各影响因素的理论表达式,最后基于刚柔耦合模型对敲击各影响因素进行系统的分析研究。研究结果表明,通过合理地设计齿轮系统参数可以把敲击控制在理想范围内。

关 键 词:变速器    敲击    刚柔耦合模型    敲击时间历程

Research on Characteristics of Transmission Rattle Based on Rigid-Flexible Coupling Model
Ding Kang,Chen Zhiqiang,Yang Zhijian.Research on Characteristics of Transmission Rattle Based on Rigid-Flexible Coupling Model[J].Journal of Vibration,Measurement & Diagnosis,2016,36(6):1129-1135.
Authors:Ding Kang  Chen Zhiqiang  Yang Zhijian
Abstract:In order to research the characteristics of the transmission gear rattle, a special test transmission containing only two stalls was designed. The test transmission considered the complex relationship between each part, internal dynamic excitation of gears, engine speed fluctuation and load incentives, bearing stiffness and damping characteristics, and flexible properties box. A transmission rigid-flexible coupling multi-body dynamics model was built in LMS virtual lab software. The condition of transmission gear system rattle was introduced, and an accurate expression of rattle time history and each factor was derived. Finally, each rattle factor was analyzed systematically based on the rigid-flexible coupling model. The results showed that the rattle can be controlled in the ideal range through rational design of the gear system parameters.
Keywords:transmission  rattle  rigid-flexible coupling model  rattle time history
本文献已被 CNKI 等数据库收录!
点击此处可从《振动.测试与诊断》浏览原始摘要信息
点击此处可从《振动.测试与诊断》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号