| 基于齿面发生线的弧齿锥齿轮切齿运动分析 |
| |
| 引用本文： | 张学成,呼咏,杨兆军. 基于齿面发生线的弧齿锥齿轮切齿运动分析[J]. 北京工业大学学报, 2010, 36(11) |
| |
| 作者姓名： | 张学成 呼咏 杨兆军 |
| |
| 作者单位： | 吉林大学,机械科学与工程学院,长春,130025;吉林大学,机械科学与工程学院,长春,130025;吉林大学,机械科学与工程学院,长春,130025 |
| |
| 基金项目： | 吉林省科技支撑计划重点资助项目(20080346) |
| |
| 摘 要： | 为了展成切削出无理论误差的球面渐开线齿形的弧齿锥齿轮齿面,采用以齿面理论发生线作为刀刃的切削方法.分析了此方法所需要的运动及运动的实现方法.结果表明:采用此种方法切齿时,机床运动与结构简单,刀具简单,仅需1次工件装卡即可完成弧齿锥齿轮凸面、凹面的粗加工和精加工;大齿轮和小齿轮、左旋齿轮和右旋齿轮均可以用同一机床、同一刀盘完成切削,且容易调整齿面接触区.
|
| 关 键 词： | 弧齿锥齿轮 齿面切削加工 球面渐开线齿形 |
Cutting Movement Analysis of Spiral Bevel Gear Based on the Tooth Generating Line |
| |
| ZHANG Xue-cheng,HU Yong,YANG Yao-jun. Cutting Movement Analysis of Spiral Bevel Gear Based on the Tooth Generating Line[J]. Journal of Beijing Polytechnic University, 2010, 36(11) |
| |
| Authors: | ZHANG Xue-cheng HU Yong YANG Yao-jun |
| |
| Affiliation: | ZHANG Xue-cheng,HU Yong,YANG Yao-jun(College of Mechanical Science , Engineering,Jilin University,Changchun 130025,China) |
| |
| Abstract: | In order to cut the tooth surface of spiral bevel gear with spherical involute tooth profile which has no theoretical errors,we take the tooth surface generating line as the cutting edge.This method is base on the theory that the trace of circular arc on the tangent plane can form the conical involute hilicoid when the basic cone of spiral bevel gear rolling on its tangent plane.The movements that this kind of generating cutting method needs have been analyzed,and the method to realize the movements have be... |
| |
| Keywords: | spiral bevel gear gear surface cutting spherical involute tooth profile |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
