| 不锈钢精加工正角刀片槽型的设计 |
| |
| 引用本文： | 尹江华,张红梅.不锈钢精加工正角刀片槽型的设计[J].工具技术,2020(2):38-41. |
| |
| 作者姓名： | 尹江华 张红梅 |
| |
| 作者单位： | 株洲欧科亿数控精密刀具股份有限公司;湖南工业大学 |
| |
| 基金项目： | 湖南省科技创新项目(2017TJCYJZ0172);湖南省自然科学青年基金(2017JJ3064);湖南省教育厅一般项目(17C0465) |
| |
| 摘 要： | 通过分析两种进口精车不锈钢断屑槽刀片,对该正角刀片的槽型进行测绘并进行切削对比试验,系统分析其槽型结构。结果表明:刀片的前角、刃宽和复合断屑台在加工不锈钢时对断屑起关键作用。通过试验、综合分析和验证后,确定不锈钢精加工正角刀片槽型最优结构为5°单前角、0刃宽和复合断屑台。
|
| 关 键 词： | 不锈钢精车削 断屑槽 正角刀片 |
Design of Positive Inserts Groove for Stainless Steel Finishing |
| |
| Yin Jianghua,Zhang Hongmei.Design of Positive Inserts Groove for Stainless Steel Finishing[J].Tool Engineering(The Magazine for Cutting & Measuring Engineering),2020(2):38-41. |
| |
| Authors: | Yin Jianghua Zhang Hongmei |
| |
| Affiliation: | (Engineer,Zhuzhou OKE Precision Cutting Tools Co.,Ltd.,Zhuzhou,Hunan 412008,China;不详) |
| |
| Abstract: | Based on the analysis of two most advanced stainless steel chip groove blades in foreign countries,these blades are mapped and compared,and the groove structure is analyzed systematically.The results show that the front angle,blade width and composite chip break table play a key role in cutting stainless steel products.After experiments,comprehensive analysis and verification,it is determined that the optimal structure of the positive angle blade groove is:5°single front angle,0 blade width and composite chip break table. |
| |
| Keywords: | finish cutting stainless steel chip-breaking groove positive inserts |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
