首页 | 本学科首页   官方微博 | 高级检索  
     

超快冷工艺对X70管线钢组织的影响
作者姓名:陈雨来  张栋斌  余伟  郭锦
作者单位:北京科技大学高效轧制国家工程研究中心, 北京 100083
摘    要:通过热模拟机研究超快冷工艺中冷却速率和终轧温度对X70管线钢组织细化及马氏体/奥氏体小岛的影响.随着冷却速率的增大,铁素体晶粒尺寸减小,M/A岛的体积分数先增大后降低,M/A岛的尺寸变化则相反.提高终轧温度,铁素体晶粒尺寸略微增大,M/A岛的体积分数增加;但在900~940℃范围内,随着终轧温度的升高,试样中M/A岛的体积分数略减小,尺寸增大. 

关 键 词:管线钢    冷却    微观组织    晶粒细化
收稿时间:2011-12-22

Influence of ultra-fast cooling on the microstructure of X70 pipeline steel
Affiliation:National Engineering Research Center for Advanced Rolling Technology, University of Science and Technology Beijing, Beijing 100083, China
Abstract:The effects of cooling rate and finish rolling temperature on the microstructure refinement and marten-site/austenite (M/A) islands in X70 pipeline steel were studied with a Gleeble thermal-mechanical simulation machine. When the cooling rate increasing, the grain size of ferrite decreases, the volume fraction of M/A islands increases first and then decreases, but the dimensional change of M/A islands is opposite to the volume fraction. With the finish rolling temperature rising, ferrite in the steel slightly grows up and the volume fraction of M/A islands increases; but when the finish roiling temperature increases from 900 to 940℃, the volume fraction of M/A islands slightly decreases and the size of M/A islands increases. 
Keywords:
点击此处可从《》浏览原始摘要信息
点击此处可从《》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号