| 基于UG的专用数控铣床铣头结构设计与运动仿真 |
| |
| 引用本文： | 陈欣,张开学,付玉升.基于UG的专用数控铣床铣头结构设计与运动仿真[J].机械工程与自动化,2007(2):38-39. |
| |
| 作者姓名： | 陈欣 张开学 付玉升 |
| |
| 作者单位： | 沈阳工业大学,机械工程学院,辽宁,沈阳,110023 |
| |
| 摘 要： | 以数控螺杆铣床铣头为研究对象,利用三维仿真软件UG建立模型并对其进行动态仿真,实现了铣头结构的虚拟设计、虚拟装配及三维动态仿真,验证了铣头结构设计的合理性。
|
| 关 键 词： | 铣头设计 三维建模 运动仿真 |
| 文章编号： | 1672-6413(2007)02-0038-02 |
| 修稿时间： | 2006-09-07 |
Structure Design and Dynamic Simulation of the Mill Head of Specialized NC Milling Machine Based on UG |
| |
| CHEN Xin,ZHANG Kai-xue,FU Yu-sheng.Structure Design and Dynamic Simulation of the Mill Head of Specialized NC Milling Machine Based on UG[J].Mechanical Engineering & Automation,2007(2):38-39. |
| |
| Authors: | CHEN Xin ZHANG Kai-xue FU Yu-sheng |
| |
| Affiliation: | School of Mechanical Engineering, Shenyang University of Technology, Shenyang 110023,China |
| |
| Abstract: | The mill head of NC(numeral control) screw arbor milling machine was studied.The virtual design,the virtual assembly,and the 3D(three-dimensional)dynamic simulation were achieved by utilizing the UG(Unigraphics)3D simulation software to set up the model and to perform the dynamic simulation.Then the rationality of the structure design of the mill head was validated. |
| |
| Keywords: | the design of mill head setting up 3D model dynamic simulation |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
