Microstrip tapered traveling wave antenna for wide range of beam scanning in X‐ and Ku‐bands

In this work, a broadband traveling wave antenna (TWA) is presented as a microstrip design that is capable of a wide range of beam scanning by changing the operation frequency within 8 to 14 GHz. For this purpose, a rhombus shaped microstrip patch is used as a unit element and TWA is built as a tapered microstrip line consisting of the cascaded rhombus shaped unit elements and terminated by a rectangular antenna instead of traditional resistive termination which can be called patch loaded traveling wave antenna (PLTWA). Optimization and simulation of the PLTWA is carried out using 3‐D Microwave simulation software CST and its dimensions are resulted as 130 × 30 mm. From the simulations, it should be noted that the patch termination increases the maximum gain almost 3 dB and the total efficiency up to 90% compared to the traditional resistive load over the operation band at the expanse of a small distortion on S₁₁ characteristics. Then the PLTWA is fabricated and measured along its operation band 8 to 14 GHz and it exhibits a peak gain of 9.5 dBi at 11 GHz. The measured gain of the proposed antenna is found between 9 dB and 12 dB and its beam direction is steerable with the range of 80° (?65°‐15°) over the operation band 8 to 14°GHz.