Design of a low‐cost 1‐20 GHz magnetic near‐field probe with FR‐4 printed circuit board

An ultra‐wideband magnetic near‐field probe based on a conventional low‐cost four layers of FR‐4 printed circuit board is proposed in this article. It can be used to measure the magnetic near‐field strength from RF magnetic sources or electronic devices for EMI conformance test. The operating frequency of the probe is from 1 GHz up to 20 GHz. The probe is constructed based on a coplanar waveguide and stripline with a short‐end loop. The probe dimension is 10 mm × 25 mm × 0.6 mm. The prototype probe is electric field‐shield structure and has a very high unwanted electric field suppression ratio about 17.7 dB. The probe calibration factor from the simulation agrees well with the calibration factor computed from the measurement. The average probe factor is 38.8 dBS/m and probe sensitivity is 47.4 dB μ A/m.