| 曲线拟合在航空发动机内壁温度测试中的应用 |
| |
| 引用本文： | 郭海伟,郝晓剑,周汉昌,潘保武. 曲线拟合在航空发动机内壁温度测试中的应用[J]. 仪表技术与传感器, 2011, 0(12) |
| |
| 作者姓名： | 郭海伟 郝晓剑 周汉昌 潘保武 |
| |
| 作者单位： | 中北大学,仪器科学与动态测试教育部重点实验室,山西太原030051 |
| |
| 基金项目： | 中北大学电子测试技术国家重点实验室基金项目(9140C1204040705) |
| |
| 摘 要： | 借助螺塞热电偶温度传感器和多路数据采集卡,建立了瞬态温度测试系统,提出利用曲线拟合外推法来实现对发动机内壁瞬态温度的测量.在此基础上,利用氢氧焰模拟航空发动机内部瞬态高温源,分别得出了传感器和红外测温仪测得的发动机内壁表面温度变化曲线.实验结果表明:2条结果曲线的整体变化趋势,特别是在峰值处具有较好的一致性,且其精度达到1.84％,从实验上验证了该方法的可行性.
|
| 关 键 词： | 热电偶 温度外推法 航空发动机 曲线拟合 瞬态温度 |
Application of Curve Fitting in Measuring Inside-wall Surface Temperatures of Aero-engine |
| |
| GUO Hai-wei , HAO Xiao-jian , ZHOU Han-chang , PAN Bao-wu. Application of Curve Fitting in Measuring Inside-wall Surface Temperatures of Aero-engine[J]. Instrument Technique and Sensor, 2011, 0(12) |
| |
| Authors: | GUO Hai-wei HAO Xiao-jian ZHOU Han-chang PAN Bao-wu |
| |
| Affiliation: | GUO Hai-wei,HAO Xiao-jian,ZHOU Han-chang,PAN Bao-wu(Key Laboratory of Instrumentation Science & Dynamic Measurement(North University of China),Ministry of Education,Taiyuan,030051,China) |
| |
| Abstract: | Curve fitting extrapolation was proposed to measure inside-wall surface temperatures of aero-engine by establishing transient high temperature testing system,with the help of screw thermocouple temperature sensor and multi-channel data acquisition card.On this basis,the sensors and high-speed infrared thermometer were simultaneously used to measure the surface temperature changing curves internal the wall coat of aero-engine respectively,with oxy-hydrogen flame simulating the transient high-temperature heat... |
| |
| Keywords: | thermocouple temperature extrapolation aero-engine curve fitting transient temperature |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
