首页 | 本学科首页   官方微博 | 高级检索  
     

32通道汽车传感器非连续信号监控系统
引用本文:田锦明,龚成龙,陈瑞,纪林海.32通道汽车传感器非连续信号监控系统[J].仪表技术与传感器,2011(11).
作者姓名:田锦明  龚成龙  陈瑞  纪林海
作者单位:1. 淮海工学院电子工程学院,江苏连云港,222005
2. 西安邮电学院通信与信息工程学院,陕西西安,710061
基金项目:淮海工学院自然科学科研项目资助(2010150009)
摘    要:设计了一套适合汽车传感器非连续信号性能测试的数据采集终端,利用NI-6259数据采集卡将采集终端的数据和PC机连接起来,组成一套完整的汽车传感器性能测试监控系统.该系统能够实时显示高电平、低电平的最大值、最小值、平均值,占空比,频率和倍频与否,被测信号的频率范围在1 ~8 kHz.测量数据与界面上指定的数据范围对比,自动判断是否合理,并分类保存.

关 键 词:凸轮传感器  非连续信号  占空比  LabVIEW  数据采集

Non-continuous Signal Monitoring System for 32-Channel Auto Sensor
TIAN Jin-ming , GONG Cheng-long , CHEN Rui , Jl Lin-hai.Non-continuous Signal Monitoring System for 32-Channel Auto Sensor[J].Instrument Technique and Sensor,2011(11).
Authors:TIAN Jin-ming  GONG Cheng-long  CHEN Rui  Jl Lin-hai
Affiliation:TIAN Jin-ming1,GONG Cheng-long1,CHEN Rui2,JI Lin-hai1(1.School of Electronic Engineering,Huaihai Institute of Technology,Lianyungang 222005,China,2.School of Telecommunications and Information Engineering,Xi'an Institute of Post and Telecommunications,Xi'an 710061,China)
Abstract:A set of data acquisition terminal for automotive sensor non-continuous signal performance testing was designed.It is connected together to form a complete set of automotive sensor performance test monitoring system using NI-6259 data acquisition card and PC data collection terminal.The system can display real-time maximum,minimum and average of high level and low,duty cycle,frequency,and flipping or not.The measured signal frequency range is from 1 Hz to 8 kHz.The measured data is contrasted to the specifi...
Keywords:camshaft sensor  non-continuous signal  duty cycle  LabVIEW  data acquisition  
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号