| 连续聚酯装置增容 |
| |
| 引用本文： | 王春海,李国政,王伟,王亚良.连续聚酯装置增容[J].合成纤维工业,2004,27(2):44-45. |
| |
| 作者姓名： | 王春海 李国政 王伟 王亚良 |
| |
| 作者单位： | 黑龙江龙涤股份有限公司,黑龙江,阿城,150316;黑龙江龙涤股份有限公司,黑龙江,阿城,150316;黑龙江龙涤股份有限公司,黑龙江,阿城,150316;黑龙江龙涤股份有限公司,黑龙江,阿城,150316 |
| |
| 摘 要： | 对德国吉玛公司的 80kt/a连续聚酯装置进行增容改造 ,调整部分设备 ,终缩聚气相挡扳由圆形换成扇形 ,缩短与出口的距离。浆料总量比保持在 1.76,酯化温度提高 3～ 5℃ ,压力增加 5～ 8kPa ,停留时间不变或略有缩小 ,预缩聚Ⅱ的液位提高到 45 % ,升高温度 ,余压降低到 1.2 9kPa ,适当提高搅拌速度等 ,熔体产量由 3 2 5t/d提高到 3 60t/d。
|
| 关 键 词： | 聚对苯二甲酸乙二醇酯 增容 生产能力 工艺 改造 |
| 文章编号： | 1001-0041(2004)02-0044-02 |
| 修稿时间： | 2003年6月30日 |
Capacity enlargement of continuous polyester plant |
| |
| Wang Chunhai,Li Guozheng,Wang Wei,Wang Yaliang.Capacity enlargement of continuous polyester plant[J].China Synthetic Fiber Industry,2004,27(2):44-45. |
| |
| Authors: | Wang Chunhai Li Guozheng Wang Wei Wang Yaliang |
| |
| Abstract: | A series of innovation for capacity enlargement was conducted on an 80 kt/a continuous polyester plant,such as adjusting partial equipments and parts,changing gas outlet baffle of final polycondensation from circle to sector,minimizing the distance between the baffle and the outlet. The melt output can be increased from 325 t to 360 t under the conditions as followed: slurry ratio remaining at 1.76,esterification temperature and pressure increased by 3-5℃ and 5-8 kPa,respectively,resident time remaining unchanged or decreased slightly,liquid level increased to 45%,residue pressure decreased to 1.29 kPa and properly increased temperature and stirring speed in the stage of prepolycondensation Ⅱ. |
| |
| Keywords: | polyethylene terephthalate capacity enlargement production capacity technological process innovation |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
