|
|||||
|
|
| 立式行星磨启动阶段的动力学研究 | |
| 引用本文： | 郝雪弟,卞致瑞,尹常治,刘立,殷宝霜. 立式行星磨启动阶段的动力学研究[J]. 冶金设备, 2007, 0(1): 16-20 |
| 作者姓名： | 郝雪弟 卞致瑞 尹常治 刘立 殷宝霜 |
| 作者单位： | 1. 北京科技大学机械工程学院,北京,100083;河北理工大学机械工程学院,唐山,063009 2. 北京科技大学机械工程学院,北京,100083 3. 北京科技大学土木与环境工程学院,北京,100083 4. 唐山学院,唐山,063000 |
| 摘 要： | 针对立式行星磨启动阶段不同转速下的载荷特点,利用多体动力学软件与有限元分析软件联合仿真,得到基于精确动力学仿真结果的行星磨磨辊系统的应力状态。根据分析结果,提出确定立式行星磨实际操作参数的依据。 |
| 关 键 词： | 立式行星磨 动力学仿真 有限元分析 |
| 修稿时间： | 2006-09-12 |
Study on the Kinetic Perfomance of the Vertical Planetary Mill During Starting-up |
|
| Hao Xuedi,Bian Zhirui,Yin Changzhi,Liu Li,Yin Baoshuang. Study on the Kinetic Perfomance of the Vertical Planetary Mill During Starting-up[J]. Metallurgical Equipment, 2007, 0(1): 16-20 | |
| Authors: | Hao Xuedi Bian Zhirui Yin Changzhi Liu Li Yin Baoshuang |
| Abstract: | A simulation of combination with the multi-body dynamics code and the finite element code is presented, which stresses the performance of the Vertical Planetary Mill(VPM) under different rotational velocity. A operating guidance of the mill is proposed according to the results of the simulation. |
| Keywords: | Vertical Planetary Mill Simulation of dynamics Analysis of the finite element method |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ | |