| MPI环境下注塑模随形冷却水道的设计与分析 |
| |
| 引用本文： | 刘鹏,刘洪军,李亚敏.MPI环境下注塑模随形冷却水道的设计与分析[J].新技术新工艺,2009(8):110-112. |
| |
| 作者姓名： | 刘鹏 刘洪军 李亚敏 |
| |
| 作者单位： | 1. 兰州理工大学,甘肃省有色金属新材料省部共建国家重点实验室,甘肃,兰州,730050
2. 兰州理工大学有色金属合金及加工教育部重点实验室,甘肃,兰州,730050 |
| |
| 基金项目： | 甘肃省科技支撑项目资助 |
| |
| 摘 要： | 注塑模冷却水道的设计不但关系到塑件质量而且也关系到注塑成型生产效率。本文通过实例，对随形冷却水道进行计算及设计。运用MoldflowMPI软件对塑件进行模拟，对传统冷却与随形冷却进行了对比，通过对制冷时间、平均温度等模拟结果进行分析，最终得出随形冷却水道使塑件冷却更加均匀，冷却时间缩短，生产效率提高。
|
| 关 键 词： | 随形冷却水道 Moldflow 冷却分析 |
Design and Analysis of Conformal Cooling Channels in Injection Mould under MPI Environment |
| |
| LIU Peng,LIU Hongjun,LI Yamin.Design and Analysis of Conformal Cooling Channels in Injection Mould under MPI Environment[J].New Technology & New Process,2009(8):110-112. |
| |
| Authors: | LIU Peng LIU Hongjun LI Yamin |
| |
| Affiliation: | LIU Peng , LIU Hongjun , LI Yamin (1. State Key Laboratory of Gansu Advanced Non--ferrous Metal Materials, Lanzhou University of Technology, Lanzhou 730050,China;2. Key Laboratory of Non--ferrous Metal Alloys and Processing of Ministry of Education, Lanzhou University of Technology,Lanzhou 730050,China) |
| |
| Abstract: | The design of the cooling channel in injection mould greatly influences the quality of plastic production and the inject production efficiency. In this paper, the eonformal cooling channels in injection mould were calculated and designed by an example. Then the process of plastic production was simulated by the software of Moldflow. Meanwhile the conformal cooling method was compared with those conventional methods, by analyzing the simulation results of the cooling time and average temperature, the result that the conformal cooling channels have more uniform cooling effects can be put forward, and the new design can get shorter cooling time and higher efficiency. |
| |
| Keywords: | Moldflow |
| 本文献已被 维普 万方数据 等数据库收录！ |
|
