| 煤焦油与废塑料共处理油化工艺的研究 |
| |
| 引用本文： | 赵金安 郭存悦. 煤焦油与废塑料共处理油化工艺的研究[J]. 煤化工, 1998, 0(1): 42-44 |
| |
| 作者姓名： | 赵金安 郭存悦 |
| |
| 作者单位： | [1]华北工学院专科学校 [2]太原工业大学 |
| |
| 摘 要： | 本文对大同直立炉低温煤焦油和废旧聚乙烯塑料共处理油化的工艺进行了研究,通过优化实验,得到了油化工艺的最佳操作条件,并对试验结果进行了分析。结果表明,在最佳工艺条件下,转化率可达８５％,煤焦油加入量为１５％。产品中柴油的十六烷值可达４８,汽油的辛烷值可达９３。
|
| 关 键 词： | 低温煤焦油 废聚乙烯 共处理 催化裂解 |
Oil-making Process through Coprocessing of Low-temperature Tar and Waste PE |
| |
| Affiliation: | The College Attached to North China Institute of Technology 030008 |
| |
| Abstract: | In this paper,the process of oil-making through coprocessing of low-temperature tar which comes from Datong standing furnace,and waste PE was studied.The optimum conditions were obtained through optimization experiments.At the same time,the quality of the product was evaluated. Product analysis showed that its conversion rate can reach 85%, the ratio of low temperature tar was 15%,hexadecyl number of obtained diesel was 48,octane value of obtained gasoline can reach 93. |
| |
| Keywords: | low-temperature tar waste PE co-processing catalytic cracking |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
