首页 | 本学科首页   官方微博 | 高级检索  
     

Al_2O_3/Al合金复合材料的耐磨性的研究
引用本文:刘政.Al_2O_3/Al合金复合材料的耐磨性的研究[J].南方冶金学院学报,1991(4).
作者姓名:刘政
作者单位:南方冶金学院机械系
摘    要:以国产氧化铝短纤维作为增强体,制备了氧化铝短纤维增强铝合金复合材料。本文研究了这种材料的耐磨性能,研究结果表明,氧化铝短纤维具有增强作用,复合材料比基体有高得多的硬度;在润滑条件下,复合材料的磨损率比基体的低,在较大载荷作用下,复合材料表现了优良的抗粘着磨损的能力,在一般磨损情况下,纤维体积率小于15%,可保证复合材料有足够的耐磨性。

关 键 词:复合材料  氧化铝短纤维  耐磨性

An Investigation into Wear Resistance of Ah O3 /Al Alloy Composite
Liu Zheng.An Investigation into Wear Resistance of Ah O3 /Al Alloy Composite[J].Journal of Southern Institute of Metallurgy,1991(4).
Authors:Liu Zheng
Affiliation:Department of Machinery
Abstract:This paper studies the wear resistance of aluminum alloy composite. In preparing the composite samples,home-made alumina short fibre is used as reinforcement.Experimental results indicate that the composite has considerably higher hardness due to the reinforcement and, when lubricated, a lower wear rate than the metal matrix,and that it exhibits a remarkable ability to resist adhesive wear under heavy loads. Moreover, a less than 15% volume of fibre in the composite will give it a wear resistance high enough to meet the requirement in general use.
Keywords:composite  alumina short fibre  wear resistance
本文献已被 CNKI 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号