Synthesis,characterization, and properties of amphiphilic poly(ethyl acrylate) with uniform polyoxyethylene grafts

Amphiphilic copolymers of ethyl acrylate (EA) with uniform polyoxyethylene (PEO) grafts were synthesized by copolymerization of EA with methacrylate terminated PEO macromer in benzene using azobisisobutyronitrile as the initiator. The effects of the molecular weight of the macromers, the charging weight ratio of the macromer to EA, the total monomer concentration, and the amount of initiator on the grafting efficiency (GE) were reported as was the molecular weight of the copolymers. The highest GE reached to above 90% and the molecular weight of the copolymers varied from (5–15) × 10⁴. The reactivity ratio of EA with the macromer was determined to be 0.83. The graft copolymers were purified with extractions and the purified products were characterized with IR, ¹H‐NMR, gel permeation chromatography, differential scanning calorimetry, and membrane osmometry. The average grafting number of the copolymer varied from 2 to 11. The glass‐transition temperature of the poly(EA) in the copolymer was increased because of the partial compatibility of the two components. The crystalline property, emulsifying property, and dilute solution viscosity of the graft copolymers, as well as ionic conductivity of their complexes with alkali metal salts, were studied. The emulsifying volume decreased with the increasing molecular weight of the PEO grafts. The addition of NaOH to the emulsion affected the emulsifying volume only slightly, whereas the addition of HCl changed the oil in water type emulsion into a water in oil type. The conductivity of the LiClO₄ complex of the copolymer with an oxyethylene/Li ratio of 20 reached 3.7 × 10^?5 S/cm at 27°C. The lower the crystallinity of the complex, the higher was the conductivity. The dilute solution viscosity showed the existence of intramolecular microphase separation. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 80: 903–912, 2001