| Abstract: | Abstract Reverse Osmosis (RO) has found extensive application in industry as a highly efficient separation process. In most cases, it is required to select the optimum set of operating variables such that the performance of the system is maximized. In this work, an attempt has been made to optimize the performance of RO system with a cellulose acetate membrane to separate NaCl‐Water system using Genetic Algorithm (GA). The GAs are faster and more efficient than conventional gradient based optimization techniques. The optimization problem was to maximize the observed rejection of the solute by varying the feed flowrate and overall permeate flux across the membrane for a constant feed concentration. To model the system, a well‐established transport model for RO system, the Spiegler‐Kedem model was used. It was found that the GA converged rapidly to the optimal solution at the 8th generation. The effect of varying GA parameters like size of population, crossover probability, and mutation probability on the result was also studied. The algorithm converged to the optimum solution set at the 8th generation. It was also seen that varying the computational parameters significantly affected the results. |
