| Abstract: | Abstract Mercury removal from wastewater is a recognized pollution control challenge today. In the present investigation, the biosorption of Hg(II) onto the dead biomass of four different species of marine Aspergillus, prepared by alkaline treatment, was studied. Among the cultures studied, A. niger was found to be the most efficient for Hg(II) removal. The effects of initial Hg(II) concentration, contact time, pH, temperature, and biosorbent dosage on biosorption were also investigated. It was observed that biosorption equilibriums were established in about 2 h. Under the optimum conditions (pH: 3.0, Hg(II) concentration: 250 mg/L, biomass dose: 0.8 g/L, temperature: 40°C and contact time: 2 h), 40.53 mg Hg(II) was biosorbed per gram of dead biomass of A. niger. Kinetic studies based on fractional power, zero order, first order, pseudo first order, Elovich, second order, and second order rate expressions have also been carried out where the pseudo second order model exhibited best fit to experimental data. The intra‐particle diffusion study revealed that film diffusion is the rate‐limiting sorption process for Hg(II) on A. niger. The nature of the possible cell–metal ion interactions was evaluated by FTIR, SEM, and EDAX analysis. These examinations indicated the involvement of ‐OH and ‐NH2 + groups in the biosorption process present on the surface of the dead fungal biomass. Here, Hg(II) ions were deposited on the surface of the biomass as a film like structure. |
