| Abstract: | The fracture toughness of an epoxy resin system, diglycidyl ether of butanediol, DGEB, cured with 4-4′ diaminodiphenyl sulphone, DDS, has been studied by varying the crosslinking density and state of aging. A stable, but rough, crack propagation was observed with specimens that were 99 percent cured and quenched. When the extent of curing was less than 99 percent or the material was aged for more than 20 min at 62°C, crack propagation was of the unstable stick-slip nature. Aging was found to decrease the initiation fracture toughness dramatically, but the arrest fracture toughness was almost unchanged. This result was associated with a change of relaxation strength of the primary, a, transition with aging. An increase of crosslinking density was found initially to reduce the fracture toughness of this epoxy resin, but the fracture toughness increased after 87 percent of curing. The initial decrease of the fracture toughness was attributed to a decrease of relaxation strength of the primary transition (i.e., the area under the α-relaxation peak), while the increase of the fracture toughness after 87 percent curing was explained by the onset of the stablerough crack propagation, Micrographs taken by scanning electron microscopy-showed possible existence of blunting during crack propagation and a decrease of blunting with the extent of aging. |
