首页 | 本学科首页   官方微博 | 高级检索  
     

镍硼及镍钼硼合金镀层的组织和性能研究
引用本文:饶群力,王浩伟,周尧和.镍硼及镍钼硼合金镀层的组织和性能研究[J].电镀与环保,2001,21(2):22-24.
作者姓名:饶群力  王浩伟  周尧和
作者单位:上海交通大学材料科学与工程学院540所,
摘    要:通过化学镀方法制备高硬度Ni B及Ni Mo B合金镀层。经XRD分析确认Ni B合金镀态镀层组织以非晶态为主 ,并混有含硼过饱和镍的固溶体。热处理后 ,Ni B和Ni Mo B两合金镀层的硬度分别高达Hv12 0 0和 140 0以上。Ni Mo B镀层组织及性能随Na2 MoO4 ·2H2 O浓度而变化 ;当浓度为 0 .6 0 4 g L时 ,具有最高的硬度

关 键 词:镍硼合金  镍钼硼合金  化学镀  热处理  镀层  性能
文章编号:1000-4742(2001)02-0022-03
修稿时间:2000年8月27日

Microstructure and Property of Electroless Ni-B and Ni-Mo-B Coatings
RAO Qun li,WANG Hao wei,et al..Microstructure and Property of Electroless Ni-B and Ni-Mo-B Coatings[J].Electroplating & Pollution Control,2001,21(2):22-24.
Authors:RAO Qun li  WANG Hao wei  
Abstract:High hardness Ni-B and Ni-Mo-B coatings are prepared by EN with potassium borohydride reducing agent. As-plating microstructure of Ni-B coating is confirmed to be mixture of amorphous and supersaturated solid solution with XRD analysis. Micro-hardness of Ni-B and Ni-Mo-B coating is more than Hv1200 and 1400 respectively after heat treatment. Property and microstructure of Ni-Mo-B alloy deposit vary with Na2 MoO4 · 2H2O in bath, and optimal one is 0.604g/L.
Keywords:Ni  B alloy coating  Ni  Mo  B alloy coating  Electroless  Heat treatm
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号