Assessment of durability of recycled aggregate concrete produced by two-stage mixing approach

As more than 50% construction and demolition (C&D) wastes are composed of concrete debris in Hong Kong, recycling this debris into Recycled Aggregate (RA) for production of Recycled Aggregate Concrete (RAC) is an efficient way to alleviate the burden on landfill areas. Since RA is generated from concrete debris which has undergone years of services, the resulting RAC bears the weaknesses of lower density, higher water absorption, and higher porosity that limit them to lower-grade applications. Pinpointing to these weaknesses, Tam et al. [2005, Cement Concrete Res 35(6):1195–1203] developed the Two-Stage Mixing Approach (TSMA) for improving the strength of RAC, leading to the possibility in applying RAC for higher-grade applications. While the improvement in strength by TSMA has been proven in Tam et al.’s work [2005, Cement Concrete Res 35(6):1195–1203], the durability, in terms of deformation (shrinkage and creep) and permeability (water, air and chloride permeability), remains to be verified. In this paper, 0%, 20% and 100% of RA substitutions have been experimented to compare the durability performance of the Normal Mixing Approach (NMA) and the TSMA. Experiment results highlight that: (i) the higher the substitutions of RA, the weaker the performance of RAC; and (ii) the deformation and permeability of RAC can be enhanced when adopting TSMA. Therefore, it demonstrates that TSMA can help to improve the durability of RAC, on top of the previously verified strength improvement, and thus opening up wider applications of RAC.