| 元胞自动机理论在三维复杂槽型车刀片设计中的应用 |
| |
| 引用本文： | 冯新敏,于惠力,陈波,高东宇,刘强,孙玉静,孙顺龙.元胞自动机理论在三维复杂槽型车刀片设计中的应用[J].工具技术,2011,45(10):29-32. |
| |
| 作者姓名： | 冯新敏 于惠力 陈波 高东宇 刘强 孙玉静 孙顺龙 |
| |
| 作者单位： | 哈尔滨理工大学 |
| |
| 基金项目： | 黑龙江省教育厅2005年度科学技术研究(一般)项目 |
| |
| 摘 要： | 将适合解决复杂问题的元胞自动机理论(简称CA)用于设计断屑槽型的剖面,并借助Pro/Engineer将所得剖面合成为车刀片三维复杂槽型实体,再采用电火花加工所设计的三维复杂槽型车刀片。断屑验证试验结果表明,该刀片断屑性能良好,达到了预期目标,同时也表明本文所采用的基于元胞自动机理论的三维复杂槽型车刀片设计是可行的。
|
| 关 键 词： | 三维复杂槽型车刀片 设计 元胞自动机 |
Design Three-dimensional Complex Groove Turning Insert with Cellular Automata Theory |
| |
| Feng Xinmin,Yu Huili,Chen Bo,Gao Dongyu,Liu Qiang,Sun Yujing,Sun Shunlong.Design Three-dimensional Complex Groove Turning Insert with Cellular Automata Theory[J].Tool Engineering(The Magazine for Cutting & Measuring Engineering),2011,45(10):29-32. |
| |
| Authors: | Feng Xinmin Yu Huili Chen Bo Gao Dongyu Liu Qiang Sun Yujing Sun Shunlong |
| |
| Affiliation: | Feng Xinmin, Yu Huili, Chen Bo, Gao Dongyu, Liu Qiang, Sun Yujing, Sun Shunlong |
| |
| Abstract: | Cellular automata is especially used to solve problems in complicated situation, hence this paper adopts cellular automata to design sections of the grooves. After blending the sections through Pro/Engineer into part, an insert with three - di- mensional complex groove was developed with EDM. The results of cutting experiment showes a great performance of the grooved insert in turning, reaching the expected goal, and feasibility to design a three - dimensional complex groove insert with cellular automata as well. |
| |
| Keywords: | 3D complex groove turning inserts design cellular automata |
| 本文献已被 维普 万方数据 等数据库收录！ |
|
