| 高浓度树脂生产废水处理工艺的设计 |
| |
| 引用本文： | 王万俊,储金宇,张波,石驰. 高浓度树脂生产废水处理工艺的设计[J]. 工业水处理, 2007, 27(5): 26-28 |
| |
| 作者姓名： | 王万俊 储金宇 张波 石驰 |
| |
| 作者单位： | 江苏大学环境学院,江苏,镇江,212013;江苏大学环境学院,江苏,镇江,212013;江苏大学环境学院,江苏,镇江,212013;江苏大学环境学院,江苏,镇江,212013 |
| |
| 摘 要： | 对某公司树脂生产废水的处理进行了试验研究,该废水的CODCr接近150 000 mg/L.经过小试确定了该废水的处理方案.首先采用物化预处理即两级催化氧化法降解废水中的有毒有害物质,提高废水的可生化性,接着用微电解法初步降低废水的CODCr,最后用UASB A/0进一步降低其CODCr,使废水CODCr小于500 mg/L达标排放.
|
| 关 键 词： | 树脂废水 催化氧化 微电解 逆流式厌氧活性污泥反应器 |
| 文章编号： | 1005-829X（2007）05-0026-03 |
| 收稿时间： | 2007-01-05 |
| 修稿时间： | 2007-01-05 |
Design of the treatment technology to highly concentrated resin wastewater |
| |
| Wang Wanjun,Chu Jinyu,Zhang Bo,Shi Chi. Design of the treatment technology to highly concentrated resin wastewater[J]. Industrial Water Treatment, 2007, 27(5): 26-28 |
| |
| Authors: | Wang Wanjun Chu Jinyu Zhang Bo Shi Chi |
| |
| Affiliation: | School of Environment, u University, Zhenjiang 212013 ,China |
| |
| Abstract: | The treatment of highly concentrated resin wastewater in a company has been studied.The CODCr of the wastewater is near 150 000 mg/L.Based on the pilot experiments,the wastewater treatment process has been confirmed.Firstly,the physicochemical pretreatment,i.e.degrading the poisonous and harmful materials in the wastewater by two-stage catalytic oxidation and increase the biochemistry capacity of the wastewater.Then,micro-electrolysis technique is used to lower the CODCr of the wastewater.At last UASB + A/O are used to further lower the CODCr of the wastewater to less than 500 mg/L,which has reached the discharge standard. |
| |
| Keywords: | resin wastewater catalytic oxidation micro-electrolysis upflow anaerobic sludge blanket reactor |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
