| 齿轮动力互研法研磨率的分析 |
| |
| 引用本文： | 姚文席,张怀存,王超然. 齿轮动力互研法研磨率的分析[J]. 北京机械工业学院学报, 1998, 13(4): 1-6 |
| |
| 作者姓名： | 姚文席 张怀存 王超然 |
| |
| 作者单位： | 北京机械工业学院机械工程系 |
| |
| 摘 要： | 影响齿轮动力互研研磨率的因素有多种。齿面诱导法曲率和滑动系数的改变是重要的影响因素。由于采用了变更中心距的方法以及与定中心距的工艺不同，齿面研磨率的一致性得到明显的改善，特别是大齿轮上更是如此。的程度可以用文中提出的综合指标进行度量。
|
| 关 键 词： | 研齿 渐开线齿轮 啮合原理 |
ANALYSIS ON THE ABRASION RATE IN THE DYNAMIC MUTUAL ABRASION OF GEARS |
| |
| Yao Wenxi,Zhang Huaicun,Wang Chaoran. ANALYSIS ON THE ABRASION RATE IN THE DYNAMIC MUTUAL ABRASION OF GEARS[J]. Journal of Beijing Institute of Machinery, 1998, 13(4): 1-6 |
| |
| Authors: | Yao Wenxi Zhang Huaicun Wang Chaoran |
| |
| Abstract: | The abrasion rate of gears is affected by many factors in the dynamic mutual abrasion proces. Changes of the induced normal curvature and the relative sliding coefficient of gears are the important factors. As the method of center distance varing was adopted and the technologe was differ from the condition of center distance constant, the gear concordance of abrasion rate on the tooth face of gears was improved obviously especially in the big gear. The degree of improvement can be measured with comprehensive index provided here. |
| |
| Keywords: | abrasion involute gear mesh principle |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
