首页 | 本学科首页   官方微博 | 高级检索  
     

预聚体法合成新型不黄变聚氨酯胶黏剂的研究
引用本文:徐文超,朱长春,宋文生,唐亚夫. 预聚体法合成新型不黄变聚氨酯胶黏剂的研究[J]. 化学推进剂与高分子材料, 2008, 6(3): 26-28
作者姓名:徐文超  朱长春  宋文生  唐亚夫
作者单位:河南科技大学化工与制药学院,河南洛阳,471003;洛阳吉明化工有限公司,河南洛阳,471012
基金项目:河南省高校青年骨干教师资助项目
摘    要:介绍预聚体法合成不黄变聚氨酯胶黏剂的基本工艺。实验确定IPDI/PBA3000体系的预聚最佳反应温度在90~95℃,预聚时间为3.0h,聚酯含水质量分数控制在0.05%以内,制备出的不黄变聚氨酯预聚体性能稳定。以1,6-己二醇为扩链剂,选择异氰酸酯指数为1.05;并在120~140℃下后熟化4~10h,常温下放置1周,制得的新型不黄变聚氨酯胶黏剂耐热性好、粘接强度高、综合性能优良。

关 键 词:聚氨酯胶黏剂  不黄变聚氨酯  胶黏剂  预聚体
文章编号:1672-2191(2008)03-0026-03
修稿时间:2008-01-07

Research on Synthesis of Novel Non-Yellowing Polyurethane Adhesives by Prepolymer Method
XU Wen-chao,ZHU Chang-chun,SONG Wen-sheng,TANG Ya-fu. Research on Synthesis of Novel Non-Yellowing Polyurethane Adhesives by Prepolymer Method[J]. Chemical Propellants & Polymeric Materials, 2008, 6(3): 26-28
Authors:XU Wen-chao  ZHU Chang-chun  SONG Wen-sheng  TANG Ya-fu
Abstract:A basic synthesis process of non-yellowing polyurethane adhesive by prepolymer method is introduced. The results show that optimal reaction temperature of polyester polyol and isophorone diisocyanate (PBA/IPDA) is 90~95℃, reaction time is 3.0h, moisture content of polyester polyol should be lower than 0.05%(mass fraction). Using 1,6-hexandiol as chain extender, under the conditions of R value 1.05, post-curing temperature 120~140℃, post-curing time 4~10h, room temperature for 1 week, novel non- yellowing polyurethane adhesive with good thermal stability, high peeling strength and good comprehensive performance was synthesized.
Keywords:polyurethane adhesive   non-yellowing polyurethane   adhesive   prepolymer
本文献已被 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号