Natural gas combined cycle with exhaust gas recirculation and CO2 capture at part-load operation

This paper aims to evaluate part-load operation of a natural gas combined cycle (NGCC) power plant with exhaust gas recirculation (EGR) and a CO₂ capture plant. Several studies have demonstrated the feasibility and the advantages of EGR at full load, but operation at part load is also important because it is a common condition when NGCC power plants are being used as backup for renewables. The results of this study show that the number of absorber trains is reduced from 4 to 3 with EGR. The efficiency of the NGCC plant with EGR was 0.5% points higher than a conventional NGCC at full load as a result of a higher CO₂ concentration in the flue gas. However, this efficiency advantage decreased as the load was reduced from 100% to 50%, with both cases presenting the same efficiency at 50% load. This means that there was no benefit from the effect of EGR at lower loads. The efficiency of a NGCC plant with EGR and CO₂ capture configuration decreased from 52.6% to 45.9% when the load was reduced from 100% to 50% compared with a conventional NGCC where the efficiency changed from 52.1% to 45.9%. It was concluded that a NGCC plant with EGR and CO₂ capture is viable, results in lower capital costs due to the smaller number of absorber trains and yields slightly higher efficiencies, for operation at part-load down to 50%.