| 基于Master CAM和UG的三棱孔的数控加工 |
| |
| 引用本文： | 高新东,刘章宇. 基于Master CAM和UG的三棱孔的数控加工[J]. 兵工自动化, 2006, 25(9): 32-33 |
| |
| 作者姓名： | 高新东 刘章宇 |
| |
| 作者单位： | 驻绵阳地区军代室,四川,绵阳,621000 |
| |
| 摘 要： | 使用Master CAM,通过建模、建立零件基本形状、编辑零件细部特征、导入三棱孔曲线数据等步骤可建立三棱孔规律曲线.再用UG软件,进入加工模块、选择毛坯实体、建立刀具及其粗/精铣刀具轨迹、模拟验证、编写识别程序等步骤实现三棱孔的数控加工.解决了只有专用机床才能加工三棱孔类零件的弊端.
|
| 关 键 词： | 三棱孔 数控加工 Master CAM UG Master 数控加工 Based Aperture 类零件 专用机床 程序 识别 模拟验证 刀具轨迹 精铣 实体 毛坯 选择 加工模块 软件 规律曲线 数据 特征 编辑 |
| 文章编号： | 1006-1576（2006）09-0032-02 |
| 收稿时间： | 2006-01-23 |
| 修稿时间： | 2006-08-11 |
NC Processing of Three-Arris Aperture Based on Master CAM and UG |
| |
| GAO Xin-dong,LIU Zhang-yu. NC Processing of Three-Arris Aperture Based on Master CAM and UG[J]. Ordnance Industry Automation, 2006, 25(9): 32-33 |
| |
| Authors: | GAO Xin-dong LIU Zhang-yu |
| |
| Affiliation: | Office of Military Affairs Delegate in Mianyang Zone, Mianyang 621000, China |
| |
| Abstract: | Based on Master CAM, the three-arris rule curve was realized by establishing models, constructing the basic shapes of apparatus, editing the detail characteristics of apparatus, and introducing the three-arris curve data. After that, the NC processing of three-arris was realized by adopting UG software, entering processing module, choosing rough entity, establishing cutter and the traces of rough or finishing milling, simulating validation, compiling reorganization program. The NC control could resolve the abuse which the three-arris aperture accessory was processed only by the special machine tool. |
| |
| Keywords: | Three-arris aperture NC processing Master CAM UG |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
