| 四杆曲线同源机构的构成特性和传动角的研究 |
| |
| 引用本文： | 吴琛,褚金奎.四杆曲线同源机构的构成特性和传动角的研究[J].机械科学与技术(西安),1999,18(1):11-13. |
| |
| 作者姓名： | 吴琛 褚金奎 |
| |
| 作者单位： | 西安理工大学!西安710048 |
| |
| 摘 要： | 四杆曲线同源机构与原始机构的对应杆长具有比例和对调关系，且同源机构要由反装构形得到，从而揭示出同源机构与原始机构在尺寸型上的内在联系；本文还提出：在大多数使用情况下，四杆曲线同源机构与原始机构具有相同的传动角
|
| 关 键 词： | 曲线同源机构 反装构形 传动角 |
Study of Construction Features and Transmission Angle of 4 bar Cognate Mechanism |
| |
| Wu Chen,Chu Jinkui,Cao Weiqing.Study of Construction Features and Transmission Angle of 4 bar Cognate Mechanism[J].Mechanical Science and Technology,1999,18(1):11-13. |
| |
| Authors: | Wu Chen Chu Jinkui Cao Weiqing |
| |
| Abstract: | Two discoveries about construction featrues of 4bar path cognate mechanism are originated in this paper to reveal the inherent relationship of dimensional type between cognate mechanisms and their original mechanism;(1) there exists length exchange in dimensional type values of cognate and original mechanisms after ratio factor has been got rid of; (2) reverse assembling manner is necessary to construct a cognate mechanism. In addition, a viewpoint that in many cases, transimission angles of cognate mechanism and original mechanism are identical is presented also. |
| |
| Keywords: | Path cognate mechanism Reverse assembling manner Transmission angle |
| 本文献已被 CNKI 维普 等数据库收录！ |
