| 厚壁容器1 1/4Cr-1/2Mo钢的焊接 |
| |
| 引用本文： | 陈后胜. 厚壁容器1 1/4Cr-1/2Mo钢的焊接[J]. 中国化工装备, 2002, 4(2) |
| |
| 作者姓名： | 陈后胜 |
| |
| 作者单位： | 安徽省安庆石油化工总厂检安公司,246002 |
| |
| 摘 要： | 本文简要地介绍了SA387Gr11C12钢焊接工艺试验,通过两种焊接方法的比较,说明双丝窄间隙自动焊是厚壁容器的最佳工艺。
|
| 关 键 词： | Cr—Mo钢 淬硬组织 窄间隙焊 |
The Welding of Thick Vessel Made of 1 1/4Cr- 1/2Mo Steel |
| |
| Chen Housheng. The Welding of Thick Vessel Made of 1 1/4Cr- 1/2Mo Steel[J]. China Chemical Industry Equipment, 2002, 4(2) |
| |
| Authors: | Chen Housheng |
| |
| Abstract: | This article briefly introduces the welding process test of SA387Gr11C12 steel compares two welding methods illuminates that the double wire narrow gap auto welding is the best process of thick vessel |
| |
| Keywords: | Cr-Mo steel hardened struture narrow gap welding |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
