| 注射拉伸吹塑用瓶坯模设计 |
| |
| 引用本文： | 宁丽霞. 注射拉伸吹塑用瓶坯模设计[J]. 模具工业, 2006, 32(1): 51-53 |
| |
| 作者姓名： | 宁丽霞 |
| |
| 作者单位： | 邵阳学院,机械工程学院,湖南,邵阳,422004 |
| |
| 摘 要： | 分析了注射瓶坯的成型特点,设计了注射瓶坯模具,介绍了模具的分型机构及脱模方式。经生产验证,模具结构合理,具有一定的推广价值。
|
| 关 键 词： | 瓶坯 注射成型 模具设计 |
| 文章编号： | 1001-2168(2006)01-0051-03 |
| 收稿时间： | 2005-07-01 |
| 修稿时间： | 2005-07-01 |
Design of the Mold for Blank Bottle by Injection-Drawing-Blow Molding |
| |
| NING Li-xia. Design of the Mold for Blank Bottle by Injection-Drawing-Blow Molding[J]. Die & Mould Industry, 2006, 32(1): 51-53 |
| |
| Authors: | NING Li-xia |
| |
| Affiliation: | School of Mechanical Engineering, Shaoyang College, Shaoyang, Hunan 422004, China |
| |
| Abstract: | The characteristic of the injection molding for blank bottle was analyzed. The injection mold was designed; the parting mechanism and demolding method were introduced. The mold proved practically feasible in structure and could be worthy of recommendation. |
| |
| Keywords: | blank bottle injection molding mold design |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
