|
|||||
|
|
| 基于CAE的注塑件结构及成型工艺参数优化 | |
| 引用本文： | 兰芳,廖小平,覃波. 基于CAE的注塑件结构及成型工艺参数优化[J]. 工程塑料应用, 2009, 37(5) |
| 作者姓名： | 兰芳 廖小平 覃波 |
| 作者单位： | 1. 广西工业职业技术学院机械工程系,南宁,530001 2. 广西大学机械工程学院,南宁,530004 3. 广西机械工业研究院,南宁,530001 |
| 基金项目： | 广西壮族自治区自然科学基金项目 |
| 摘 要： | 应用CAE软件模拟注塑件的成型过程，分析制件潜在的质量缺陷，通过优化制件结构及浇注系统改善了制件成型质量；结合正交试验方法，通过流动＋翘曲分析对模具温度、熔体温度、注射时间、保压压力和保压时间等注塑工艺参数进行优化，获得最佳工艺参数组合，为生产合格制品提供理论依据。 |
| 关 键 词： | CAE 注射成型 正交试验 结构 工艺参数 |
OPTIMIZATION OF STRUCTURE AND INJECTION MOLDING PARAMETERS FOR PLASTIC PRODUCT BASED ON CAE |
|
| Lan Fang,Liao Xiaoping,Tan Bo. OPTIMIZATION OF STRUCTURE AND INJECTION MOLDING PARAMETERS FOR PLASTIC PRODUCT BASED ON CAE[J]. Engineering Plastics Application, 2009, 37(5) | |
| Authors: | Lan Fang Liao Xiaoping Tan Bo |
| Affiliation: | Department of Mechanical Engineering;Guangxi Vocational & Technical Institute of Industry;Nanning 530001;China;College of Mechanical Engineering;Guangxi University;Nanning 530004;China;Guangxi Research Institute of Mechanical Industry;China |
| Abstract: | The injection molding process was simulated by using CAE software. Molding faults in the course of injection molding were analyzed. After the structure of part and gating system were optimized,the quality of the injection-moulded product was improved. Base on orthogonal experimental design and analysis of flow and warp of part,the injection molding parameters including mold temperature,melt temperature,injection time,packing pressure and packing time were optimized,and the optimal combination of process par... |
| Keywords: | CAE |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ | |