| 限幅绝缘盖板注塑模设计 |
| |
| 引用本文： | 王宏斌.限幅绝缘盖板注塑模设计[J].模具技术,2007(1):18-21,47. |
| |
| 作者姓名： | 王宏斌 |
| |
| 作者单位： | 郑州航天电子技术有限公司,河南,驻马店,463000 |
| |
| 摘 要： | 通过对限幅绝缘盖板的工艺分析,确定了开放型腔、滑块脱模的模具结构.此模具构思巧妙,结构简单,不但成功地解决了塑件成型、侧孔贯通、顺利脱模的问题,而且大大降低了模具成本,缩短了研制周期.
|
| 关 键 词： | 注塑模 滑块 分型面 型腔 限幅 绝缘 盖板 注塑模设计 range restricted plate insulation injection mold 研制周期 模具成本 问题 侧孔 塑件成型 结构简单 构思巧妙 模具结构 脱模 滑块 型腔 |
| 文章编号： | 1001-4934（2007）01-0018-04 |
| 收稿时间： | 2006-07-31 |
| 修稿时间： | 2006-07-31 |
Design of injection mold for insulation butt plate with restricted range |
| |
| WANG Hong-bin.Design of injection mold for insulation butt plate with restricted range[J].Die and Mould Technology,2007(1):18-21,47. |
| |
| Authors: | WANG Hong-bin |
| |
| Abstract: | insulation structure Die structure with open cavity and slide was determined through process analysis of butt plate with restricted range. The mold was smartly designed with simple It not only solved problems of lateral passage and ejection failure, but also reduced the mold cost and shortened the design cycle. |
| |
| Keywords: | injection mold slide parting surface cavity |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
