Optical and electrical transport properties of polyaniline–silver nanocomposite

Polyaniline–silver nanocomposite has been synthesized successfully by the chemical oxidative polymerization of aniline with ammonium peroxydisulphate as an initiator in presence of negatively charged silver nanoparticles. Silver nanoparticles are prepared by standard citrate reduction method. TEM, SEM, XRD, FTIR, TGA, DSC, optical absorption and photoluminescence studies are done for the morphological, structural, thermal and optical characterization of the polyaniline nanocomposite. From the TEM and SEM image, it is observed that nanoparticles are well dispersed in the polyaniline matrix. XRD pattern shows that polyaniline is amorphous, but peaks present in XRD pattern in polymer nanocomposites are for silver nanoparticles. TGA and DSC results show that polyaniline silver nanocomposite is more crystalline and more thermally stable. A surface plasmon absorption band is obtained from the optical absorption at 380 nm, which indicates that silver nanoparticles are present in the polyaniline matrix. The optical band gap of nanocomposite decreases with increasing content of silver nanoparticles. An enhancement in photoluminescence has been observed in polyaniline–silver nanocomposite than that in pure polyaniline. The electrical conductivity of polyaniline–silver nanocomposite increases with increase in silver nanoparticle content than that of pure polyaniline. This is a simple way by which optical and electrical properties of polyaniline may be enhanced by doping with suitable nanoparticles.