首页 | 本学科首页   官方微博 | 高级检索  
     

冷41块化学封堵底水技术
引用本文:郭志华,徐俊枫,齐海鹰,李建召.冷41块化学封堵底水技术[J].石油钻采工艺,2005,27(3):58-60.
作者姓名:郭志华  徐俊枫  齐海鹰  李建召
作者单位:1.辽河油田公司钻采工艺研究院, 辽宁盘锦 124010
摘    要:辽河油田稠油蒸汽驱冷41块油藏边底水锥进造成油井高含水。分析了该块边底水活动规律,根据油藏地质特点,研制出一种高温调剖和水玻璃/黏土/酚醛树脂高强度复合堵剂。该堵剂主要由聚丙烯酰胺、有机交联剂、耐高温油溶性树脂、橡胶粉、榆树皮粉、无机增强剂及热稳定剂组成,封堵强度高,耐温性好。现场试验了13井次,增油降水效果明显,平均降水10个百分点以上,解决了底水对该区块的危害问题,达到稳油控水的目的。

关 键 词:稠油    蒸汽吞吐    高强度    复合堵剂    底水
文章编号:1000-7393(2005)03-0058-03
收稿时间:2019-05-18

Chemical Plugging Bottom Water Technology of Leng41 Block
Guo Zhihua,XU Junfeng,QI Haiying,Li Jianzhao.Chemical Plugging Bottom Water Technology of Leng41 Block[J].Oil Drilling & Production Technology,2005,27(3):58-60.
Authors:Guo Zhihua  XU Junfeng  QI Haiying  Li Jianzhao
Affiliation:1.Drilling and Production Technology Research Institute of LiaoHe Oilfield, Panjin 124010, Liaoning
Abstract:High water cut cause by edge-bottom water drive of heavy oil steam-flood reservoir at Leng41 block of LiaoHe oilfield. Analyzed its activity rules of edge-bottom water, combined geological characters of this reservoir, a new combination plugging agent and fluid gelling profile control agent of sodium silicate/clay/phenolic resin were developed, which can endure high temperature and high strength and composed of polyacrylamide, organic crosslinker, resist high temperature oil soluble resin, rubber, elm, abio-reinforcing agent and thermal stabilizer, with favorable plugging and temperature tolerance. Experiment in 13 wells indicate that it can efficiently decrease the damage caused edge-bottom water, and reached the purpose of stable production and water control.
Keywords:heavy oil  steam stimulation  high strength  combined plugging agent  bottom water
本文献已被 CNKI 维普 万方数据 等数据库收录!
点击此处可从《石油钻采工艺》浏览原始摘要信息
点击此处可从《石油钻采工艺》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号