|
|||||
|
|
Change on temperature at the surface of injection moulded parts |
|
| Authors: | C. Nicolazo A. Sarda P. Vachot P. Mousseau R. Deterre |
| Affiliation: | 1. А.А. Baikov Institute of Metallurgy and Materials Science of Russian Academy of Sciences, Leninskii pr. 49, Moscow, 119991 Russia;2. P.N. Lebedev Physical Institute of Russian Academy of Sciences, Leninskii pr. 53, Moscow, 119991 Russia;1. Department for Nanostructured Materials, Jo?ef Stefan Institute, Ljubljana, Slovenia;2. Jo?ef Stefan International Postgraduate School, Ljubljana, Slovenia;3. Laboratory for Tribology and Interface Nanotechnology, University of Ljubljana, Ljubljana, Slovenia |
| Abstract: | A measuring system and a mathematical model are developed to study thermal transfer within polymers during the injection moulding phase. Temperature measurements within moulded parts reveal several “rise in the temperature” events at the surface of the part during the moulding cycle. These thermal singularities are related to the evolution of the parameters of implementation and depend on the nature of moulded polymer. The modelling of heat exchange makes it possible to integrate the evolution of the thermal contact between polymer and the mould as well as crystallization in the case of PP. The comparison between temperature experimental and theoretical results makes it possible to determine the characteristics of the process at the origin of these heating events. |
| Keywords: | |
| 本文献已被 ScienceDirect 等数据库收录！ | |