Influence of local stress on initiation behavior of stress corrosion cracking for sensitized 304 stainless steel |
| |
Authors: | Masayuki Kamaya Takumi Haruna |
| |
Affiliation: | a Institute of Nuclear Safety System, Inc., 64 Sata, Mihama-cho, Mikata-gun, Fukui 919-1205, Japan b Department of Materials Science and Engineering, Faculty of Engineering, Kansai University, 3-3-35 Yamate-cho, Suita, Osaka 564-8680, Japan |
| |
Abstract: | To investigate the influence of local stress on initiation behavior of stress corrosion cracking (SCC) for sensitized Type 304 stainless steel, cracking process during constant load SCC test was monitored and recorded with an in situ crack observation system. The changes in number of cracks, sum of crack length and cracked area on the specimen surface with test time were identified from the cracking images analyzed by image processing. In the SCC tests, many cracks were initiated and coalesced on the surface, and the coalescence of cracks played an important role to primary crack growth. The influence of applied stress on crack initiation was different from that on crack growth. In addition, there was a difference between influences of stress on incubation period to crack initiation and crack initiation rate. Due to these differences, a stress of 0.8Sy was thought to cause relatively many cracks compared with 0.5Sy and 1.3Sy (Sy = 200 MPa). Through quantitative estimation of distribution in local stress around a crack by finite element analysis method, it was deduced that the crack initiation is influenced not only by bulk stress applied at the end of the body, but also by local stress formed around pre-existing cracks. According to pre-existing cracks, stress enhancement accelerates the crack growth, while the stress relaxation causes the suppression of new crack initiation. Based on the experiment and analysis results, three types of growth process were suggested, which are caused by propagation itself, by new crack initiation at vicinity of the crack tip, and by coalescence of approaching cracks. Then, it was concluded that, in order to predict/simulate the cracking behavior of this SCC system, the influence of local stress on the crack initiation should be taken into account. |
| |
Keywords: | A. Stainless steel C. Stress corrosion B. In situ observation B. Modeling studies C. Crack initiation |
本文献已被 ScienceDirect 等数据库收录! |
|