| 带式输送机传动滚筒胀套联接有限元分析 |
| |
| 引用本文： | 王继新,王国强,罗世魁,杨景溢,杨好志. 带式输送机传动滚筒胀套联接有限元分析[J]. 起重运输机械, 2004, 0(2): 38-41 |
| |
| 作者姓名： | 王继新 王国强 罗世魁 杨景溢 杨好志 |
| |
| 作者单位： | 吉林大学;沈阳矿山机械集团 |
| |
| 摘 要： | 建立了带式输送机传动滚筒胀套联接的有限元模型，利用ANSYS的接触非线性分析功能，研究了4种胀套的安装预应力，选出了所设计滚筒应使用的胀套型号。在此基础上，分析了轴、辐板、筒壳的应力和变形，从而改进了滚筒的结构参数。最后利用实测胀套的安装预应力，验证了ANSYS接触算法的计算精度。
|
| 关 键 词： | 带式输送机 滚筒 胀套 非线性 有限元 |
| 修稿时间： | 2003-10-23 |
Finite element analysis of taper-lock connection in drive pulley of belt conveyor |
| |
| WANG Ji-xin. Finite element analysis of taper-lock connection in drive pulley of belt conveyor[J]. Hoisting and Conveying Machinery, 2004, 0(2): 38-41 |
| |
| Authors: | WANG Ji-xin |
| |
| Affiliation: | WANG Ji-xin |
| |
| Abstract: | Finite element model of taper-lock connection in drive pulley of belt conveyor is established.With ANSYS software,assembling prestress of 4 types of taper-lock connections is studied,and the taper-lock suitable for the designed drive pulley is chosen,Then stress and strain of the axis,end plate and shell of the pulley with chosen taper-lock are discussed and satisfactory structural parameters are determined.Actually measured prestress value proves that the prestress value calculated above is accurate. |
| |
| Keywords: | belt conveyor pulley taper-lock nonlinear finite element |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
