首页 | 本学科首页   官方微博 | 高级检索  
     

热浸镀55%Al-Zn后钢的拉伸性能和耐蚀性能研究
引用本文:李华飞,郑家燊,俞敦义.热浸镀55%Al-Zn后钢的拉伸性能和耐蚀性能研究[J].机械工程材料,2002,26(3):25-28.
作者姓名:李华飞  郑家燊  俞敦义
作者单位:华中科技大学化学系,湖北武汉,430074
摘    要:研究了热浸镀55%Al-Zn合金镀层钢的室温拉伸性能和耐蚀性能。结果表明:Q235钢板经热浸镀55%Al-Zn合金后的室温屈服强度和抗拉强度均高于Q235钢,而伸长率没有降低。经SEM观察,55%Al-Zn合金镀层钢的拉伸断口由钢基体的韧窝断口和Fe-Al-Zn-Si合金层的穿晶解理断口组成。腐蚀试验结果显示:热浸镀55%Al-Zn合金后钢的耐蚀性在盐雾中是镀锌钢的6倍,在盐水中是镀锌钢的3倍,并同样具有镀锌层对钢基体的电化学保护能力。

关 键 词:热浸镀  拉伸性能  耐蚀性能  碳素钢  锌铝合金镀层
文章编号:1000-3738(2002)03-0025-04
修稿时间:2001年3月12日

Tensile Properties and Corrosion Resistance of Hot-dip 55%Al-Zn Alloy Coating Steel
LI Hua fei,ZHENG Jia shen,YU Dun yi.Tensile Properties and Corrosion Resistance of Hot-dip 55%Al-Zn Alloy Coating Steel[J].Materials For Mechanical Engineering,2002,26(3):25-28.
Authors:LI Hua fei  ZHENG Jia shen  YU Dun yi
Abstract:The tensile properties and corrosion resistance of hot dip 55%Al Zn alloy coating steel are investigated. The results show that the room temperature yield strength and tensile strength of hot dip 55%Al Zn alloy coating steel are higher than those of low carbon steel (Q235) plates, and its elongation has not reduced. The fracture surfaces of tensile specimens which were examined and analyzed with SEM show that the fracture mode of tensile specimens is mixed type consisting of ductile and trans granular cleavage. The corrosion resistance of hot dip 55%Al Zn alloy coating steel is six times that of galvanized steel in salt spray and three times that of galvanized steel in salt water. 55%Al Zn alloy coating has the same ability as galvanized coating to protect the steel.
Keywords:hot dip 55%Al  Zn coating  tensile property  corrosion resistance  carbon steel
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号