| 基于正交实验法的开水煲外壳拉伸成形工艺参数优化设计 |
| |
| 引用本文： | 汪超,陶东娅. 基于正交实验法的开水煲外壳拉伸成形工艺参数优化设计[J]. 现代制造工程, 2011, 0(9) |
| |
| 作者姓名： | 汪超 陶东娅 |
| |
| 作者单位： | 台州职业技术学院机电工程学院,台州,318000 |
| |
| 摘 要： | 不锈钢开水煲外壳由于结构复杂,需要两次拉伸成形,经历了复杂的非线性弹塑性变形,因此,单凭经验很难设定其成形工艺参数.利用正交试验法,建立优化表,采用Dynaform板料成形软件,模拟对开水壶外壳两次拉伸成形,从而获得最优的工艺参数组合.
|
| 关 键 词： | 开水煲外壳 正交试验法 Dynaform软件 工艺参数 |
Stamping process parameter optimization of kettle body from stainless based on orthogonal test |
| |
| WANG Chao,TAO Dong-ya. Stamping process parameter optimization of kettle body from stainless based on orthogonal test[J]. Modern Manufacturing Engineering, 2011, 0(9) |
| |
| Authors: | WANG Chao TAO Dong-ya |
| |
| Affiliation: | WANG Chao,TAO Dong-ya(Institute of Mechanical Engineering,Taizhou Vocational and Technical College,Taizhou,318000,Zhejiang,China) |
| |
| Abstract: | Because of the kettle body from stainless steel complex structure,it need secondary stamping.Therefore,only experience very difficult to set the forming process parameters.Established the experiment table by orthogonal test.Simulation of the secondary stamping of kettle body from stainless steel by using dynaform,which is the sheet metal forming software.To obtain optimal process parameters. |
| |
| Keywords: | kettle body from stainless steel orthogonal test Dynaform process parameters |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
