|
|||||
|
|
| 基于ANSYS Workbench的集装箱双面吊车架的强度设计 | |
| 引用本文： | 刘宝波,谭柏春,李红勋,张云,蔡升烨.基于ANSYS Workbench的集装箱双面吊车架的强度设计[J].现代制造工程,2011(9). |
| 作者姓名： | 刘宝波 谭柏春 李红勋 张云 蔡升烨 |
| 作者单位： | 1. 军事交通学院科研部,天津,300161 2. 军事交通学院研究生管理大队,天津,300161 3. 总装备部汽车试验场,南京,210028 4. 76329部队,柳州,545128 |
| 摘 要： | 集装箱双面吊为断开式车架,其纵梁和鹅颈部依靠箱型结构连接,利用SolidWorks和ANSYS Workbench软件联合建立车架的有限元模型,对该模型在牵引和自行走两个行驶工况进行结构静力学分析,结果表明,车架在牵引工况下强度不足.因此,对车架进行了结构改进,改进后的车架满足了强度和刚度要求. |
| 关 键 词： | 集装箱双面吊 ANSYS Workbench软件 断开式车架 强度设计 |
Strength design of the frame of container double-side loading/unloading trailer based on ANSYS Workbench |
|
| LIU Bao-bo,TAN Bai-chun,LI Hong-xun,ZHANG Yun,CAI Sheng-ye.Strength design of the frame of container double-side loading/unloading trailer based on ANSYS Workbench[J].Modern Manufacturing Engineering,2011(9). | |
| Authors: | LIU Bao-bo TAN Bai-chun LI Hong-xun ZHANG Yun CAI Sheng-ye |
| Affiliation: | LIU Bao-bo1,TAN Bai-chun2,LI Hong-xun1,ZHANG Yun3,CAI Sheng-ye4(1 Scientific and Technology Division,Academy of Military Transportation,Tianjin 300161,China,2 Postgraduate Training Brigade,3 Automotive Ground,General Armament Ministry,Nanjing 210028,4 Units 76329,Liuzhou 545128,Guangxi,China) |
| Abstract: | The frame of container double-side loading/unloading trailer is disconnected shaping,it's stringer and gooseneck part are connected by a box structure.The finite element model of the frame is built by SolidWorks and ANSYS Workbench,then get the structural statics analysis results of traction and self-driving condition.The results show that the strength of the frame under traction is insufficient.So the frame structure is ameliorated.The strength and the stiffiness of the frame is feasible after the adjustme... |
| Keywords: | container double-side loading/unloading trailer ANSYS Workbench disconnected frame strength design |
| 本文献已被 CNKI 万方数据 等数据库收录！ | |