| Abstract: | In this study, three kinds of A380/Al_2O_3 composite coatings were prepared by cold spray(CS) using spherical, irregular and spherical + irregular shaped Al_2O_3 particulates separately mixed in the original A380 alloy powders. The influence of Al_2O_3 particulates' morphology on the microstructural characteristics(i.e.retention of Al_2O_3 content in coatings, coating/matrix interfacial bonding, pore size distribution and morphology etc.) and wear performance of the coatings was investigated by scanning electron microscopy(SEM), X-ray computed tomography(XCT) and 3-D optical profilometry. Results indicated that the spherical Al_2O_3 shows obvious tamping effect during deposition process. As a result, the interface showed a wavy shape while the matrix and particulates were mechanical interlocked with much improved adhesion. In addition, the porosity of the coating was minimized and the pores exhibited curved spherical structure with reduced dimensions. The irregular Al_2O_3 particles predominantly displayed the embedding effect together with fragmentation of Al_2O_3 particulates. Consequently, poor coating/matrix interfacial bonding, high porosity and the formation of angular-shaped pores were resulted in the coating. Dry sliding wear tests results revealed that the wear resistance of the coating is directly related with the retained content of Al_2O_3 in the coating. The coating containing irregular Al_2O_3 particulates displayed superior wear performance with its wear rate one seventh of that of the pure A380 alloy coating. The coating containing both kinds of Al_2O_3 particulates showed mixed characteristics of above two kinds of Al_2O_3 composite coatings. |
