On the notch sensitivity of flax fibre metal laminates under static and fatigue loading |
| |
Authors: | E. Kandare S. Yoo V.S. Chevali A.A. Khatibi |
| |
Affiliation: | 1. Sir Lawrence Wackett Aerospace Research Centre, School of Engineering, RMIT University, Melbourne, Australia;2. Centre for Future Materials, University of Southern Queensland, Toowoomba, QLD, Australia |
| |
Abstract: | Damage progression and failure characteristics of open‐hole flax fibre aluminium laminate (flax‐FML) specimens subjected to quasi‐static tensile or tension‐tension fatigue loading were experimentally investigated. Notched and unnotched flax‐FML composites exhibited brittle fracture with little or no fibre pull‐out and minimal delamination at the aluminium/adhesive interface. The flax‐FMLs were tested to failure under tension‐tension fatigue loading conditions (R ratio of 0.1; frequency of 10 Hz; applied fatigue stresses ranging between 30% and 80% of the respective ultimate tensile strength values). The fatigue cycles to failure decreased with the increase in the applied fatigue stress and hole diameter. A phenomenological modelling technique was developed to evaluate the fatigue life of an open‐hole flax‐FML composite. Fatigue tests on specimens subjected to a maximum load equivalent to 35% of the respective tensile failure strength were interrupted at around 85% of the corresponding fatigue life. The accumulated fatigue damage in these specimens was characterised using X‐ray computed tomography. For benchmarking purposes, the fatigue performance and related damage progression in the flax‐FML composite were compared with those of the glass‐FMLs. |
| |
Keywords: | damage progression fatigue modelling flax fibre FML composite notch strength |
|
|