首页 | 本学科首页   官方微博 | 高级检索  
     

基于三维特征参数的贝叶斯推理电路功耗模型
引用本文:陈杰,赵晓莺,李险峰,佟冬,程旭. 基于三维特征参数的贝叶斯推理电路功耗模型[J]. 计算机辅助设计与图形学学报, 2007, 19(10): 1241-1246,1251
作者姓名:陈杰  赵晓莺  李险峰  佟冬  程旭
作者单位:北京大学微处理器研发中心,北京,100871;北京大学微处理器研发中心,北京,100871;北京大学微处理器研发中心,北京,100871;北京大学微处理器研发中心,北京,100871;北京大学微处理器研发中心,北京,100871
基金项目:国家高技术研究发展计划(863计划)
摘    要:在功耗与信号统计分析的基础上,采用贝叶斯推理技术建立周期精确的功耗宏模型.通过分析信号特征对电路功耗的影响,选择输入信号密度Pin、输入跳变密度Din和输出跳变密度Dout作为贝叶斯推理的三维特征参数,证明了上述特征参数对信号时间和空间相关性信息的覆盖.实验结果表明,该方法较目前的门级功耗分析速度提高400余倍,周期功耗平均误差可以控制在10%以内.

关 键 词:功耗模型  贝叶斯推理  三维特征参数
收稿时间:2007-01-18
修稿时间:2007-01-182007-04-11

Three-Dimensional Coefficient Based Bayesian Inference Power Model
Chen Jie,Zhao Xiaoying,Li Xianfeng,Tong Dong,Cheng Xu. Three-Dimensional Coefficient Based Bayesian Inference Power Model[J]. Journal of Computer-Aided Design & Computer Graphics, 2007, 19(10): 1241-1246,1251
Authors:Chen Jie  Zhao Xiaoying  Li Xianfeng  Tong Dong  Cheng Xu
Abstract:Based on power and signal statistics analysis,this paper chooses Bayesian inference method to build cycle-accurate power macro-model.Through analyzing the influence of signal features on power,we choose input signal probability,input transition density and output transition density as 3D coefficients used in Bayesian inference,and prove those coefficients can denote the temporal and spatial correlation information of signals.The experimental results indicate that the use of the proposed model results in significant(400 times)speed-ups in power estimation time,while average error in each cycle can be limited to 10%.
Keywords:power model   Bayesian inference   three-dimensional coefficient
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号