| 电火花加工TC4钛合金时电极损耗的探讨 |
| |
| 引用本文： | 强华,张勇,黄楠,杜全兴.电火花加工TC4钛合金时电极损耗的探讨[J].新技术新工艺,2006(10):18-19. |
| |
| 作者姓名： | 强华 张勇 黄楠 杜全兴 |
| |
| 作者单位： | 西南交通大学,四川,成都,610031 |
| |
| 摘 要： | 从试验出发，在相同的条件下，用电火花成型加工方法加工钛合金TC4，分别使用紫铜和铜钨合金电极作对比试验研究。并对用不同电规准加工时的电极损耗机理和生产率（加工速度）作出了分析和探讨，得出了相应的结论。
|
| 关 键 词： | 钛合金 电火花加工 电极 损耗 |
| 收稿时间： | 2006-04-18 |
| 修稿时间： | 2006-04-18 |
Discussion of Electrode Loss During Machining Process of TC4 Alloy by EDM |
| |
| QIANG Hua,ZHANG Yong,HUANG Nan,DU Quanxing.Discussion of Electrode Loss During Machining Process of TC4 Alloy by EDM[J].New Technology & New Process,2006(10):18-19. |
| |
| Authors: | QIANG Hua ZHANG Yong HUANG Nan DU Quanxing |
| |
| Abstract: | Electrode loss during TC4 alloy machinging is studied from the experiment which copper electrode and copper-tungsten electrode are used.Mechanism of electrode loss and machining rate are analyzed when different electrical parameters are used and then corresponding conclusion is obtained. |
| |
| Keywords: | ti alloy EDM electrode electrode loss |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
