| 改性尼龙6纤维的制备与性能研究 |
| |
| 引用本文： | 廖和兴,蔡芳昌,刘志伟,邓志,胡萍,叶正涛. 改性尼龙6纤维的制备与性能研究[J]. 胶体与聚合物, 2011, 29(1): 19-21. DOI: 10.3969/j.issn.1009-1815.2011.01.006 |
| |
| 作者姓名： | 廖和兴 蔡芳昌 刘志伟 邓志 胡萍 叶正涛 |
| |
| 作者单位： | 1. 湖北大学材料科学与工程学院,湖北武汉,430062
2. 湖北大学材料科学与工程学院,湖北武汉,430062;功能材料绿色制备与应用省部共建教育部重点实验室,湖北武汉,430062 |
| |
| 基金项目： | 功能材料绿色制备与应用省部共建教育部重点实验室开放基金，湖北大学校自然科学基金，湖北省湖北大学人才专项经费 |
| |
| 摘 要： | 采用MAH-g-PE与增塑剂邻苯二甲酸二辛酯(DOP)对尼龙6进行改性制得了改性尼龙6纤维(MPA),研究了MAH-g-PE和DOP用量对MPA流变性能、热性能、热延伸及比强力性能的影响.结果表明:MPA样品流动性随着DOP含量的增加而增强,说明增塑剂对于尼龙6的增塑效果比较明显.DSC分析表明,MAH-g-PE的加入...
|
| 关 键 词： | 尼龙6 熔融纺丝 增塑剂 共混 |
Preparation and Properties of the Modified Nylon 6 Fibers |
| |
| LIAO Hexing,TSAI Fangchang,LIU Zhiwei,HU Ping,DENG Zhi,YEH Jen-tao. Preparation and Properties of the Modified Nylon 6 Fibers[J]. Chinese Journal of Colloid and Polymer, 2011, 29(1): 19-21. DOI: 10.3969/j.issn.1009-1815.2011.01.006 |
| |
| Authors: | LIAO Hexing TSAI Fangchang LIU Zhiwei HU Ping DENG Zhi YEH Jen-tao |
| |
| Affiliation: | LIAO Hexing1,TSAI Fangchang1,2,LIU Zhiwei1,HU Ping1,DENG Zhi1,YEH Jen-taut 1,2(1 Faculty of Materials Science and Engineering,Hubei University,Wuhan 430062,2 Ministry-of-Education Key Labrotory for the Green Preparation and Application of Funtional Materials,Wuhan 430062) |
| |
| Abstract: | The modified nylon 6(modified polyamide,MPA) was prepared by blending of nylon 6 with MAH-g-PE and plasticizer(DOP).The impact of the amount of MAH-g-PE and DOP on rheological properties,thermal properties,achievable draw ratio(Dra) values and tenacity values of MPA was studied.The rheological properties analysis of MPA samples indicated that the melt flow rate of MPA increased continuous with the increase of DOP contents.This showed that plasticizing effect of plasticizer for nylon 6 was obvious.DSC analys... |
| |
| Keywords: | Nylon 6 Melting Spinning Plasticizer Blending |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
