首页 | 本学科首页   官方微博 | 高级检索  
     

接触疲劳过程中的诱发相变和冷作硬化SCIEI
引用本文:张同俊,胡镇华,沈关学,崔崑. 接触疲劳过程中的诱发相变和冷作硬化SCIEI[J]. 金属学报, 1991, 27(2): 66-70
作者姓名:张同俊  胡镇华  沈关学  崔崑
作者单位:华中理工大学机二系金属材料教研室,华中理工大学,华中理工大学,华中理工大学 副教授 武汉(430074)
基金项目:机械电子工业部技术发展基金
摘    要:研究了三种丝杠钢的接触疲劳性能。利用TEM和背散射Mossbauer谱研究了三种钢在接触疲劳前后的显微组织结构;测量了接触区中心线下显微硬度随层深的变化。结果表明:接触应力诱发A_R→M相变,并导致一定深度的冷作硬化。讨论了诱发相变和冷作硬化对接触疲劳性能的影响。

关 键 词:接触疲劳  诱发相变  冷作硬化    contact fatigue  induced transformation  cold worked hardening
收稿时间:1991-02-18
修稿时间:1991-02-18

INDUCED TRANSFORMATION AND COLD WORKED HARDENING IN THREE STEELS DURING CONTACT FATIGUE
ZHANG Tongjun,HU Zhenhua,SHEN Guanxue,CUI Kun Huazhong University of Science and Technology,Wuhan. INDUCED TRANSFORMATION AND COLD WORKED HARDENING IN THREE STEELS DURING CONTACT FATIGUE[J]. Acta Metallurgica Sinica, 1991, 27(2): 66-70
Authors:ZHANG Tongjun  HU Zhenhua  SHEN Guanxue  CUI Kun Huazhong University of Science  Technology  Wuhan
Abstract:Investigations were made by TEM, back scattering Mossbauer spectra,etc. to study the contact fatigue properties, to observe the microstructures beforeand after contact fatigueing and to measure the microhardness distribution beneaththe contact surface of the three leading screw steels. The martensitic transformationof retained austenite and the cold worked hardening are induced by contact stress.The effect of induced transformation and cold. worked hardening on the contactfatigue properties has been discussed. It is believed that the contact fatigue proper-ties of the steels may be improved by means of increasing the austenite content, yettheir hardness does not reduce so much.
Keywords:contact fatigue  induced transformation  cold worked hardening  
本文献已被 CNKI 维普 等数据库收录!
点击此处可从《金属学报》浏览原始摘要信息
点击此处可从《金属学报》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号